[Original from ftp.adelaide.edu.au:pub/sun/richb/mp.tar.Z - moraes] @(#)README 1.7 92/02/17 README for mp, the PostScript pretty printer. Version 2.5.6 February 1992. Permission is given to distribute these sources, as long as the copyright messages are not removed, and no monies are exchanged. -------------------------------------------------------------------------- CONTENTS: 1. What is mp? 2. Getting started. 3. How mp works. 4. Trouble shooting hints. 5. Acknowledgements. -------------------------------------------------------------------------- 1. What is mp? -------------- The mp program will pretty print various files for you. It can be used in conjunction with a mail reading utility for producing a pretty print of your mail items. It can be used with a news reading tool to pretty print news articles. Digests can also be printed, and this version can pretty print ordinary ASCII files as well. Support for personal organiser printing was added into the last released version. This version introduces a landscape mode for mp, to allow you to print two "pages" per page. This should all help us save some trees. It uses a PostScript prologue file which normally resides in /usr/local/lib, but this can be overwritten by use of the -p option. See the manual pages for more details on these various options. ---------- The latest version of mp is available via anonymous ftp from two sites: iesd.auc.dk [Denmark] (130.225.48.4) in the PostScript directory. Thanks to Lars P. Fischer for providing this service. ftp.adelaide.edu.au [Australia] (129.127.40.3) in the pub/sun/richb directory. Thanks to Mark Prior for providing this service. Pick the site nearest to you, and please try to restrict your connections to outside 9:00am - 5:00pm local time during weekdays. ---------- There is a mailing list for people interested in mp. It is: mp@Aus.Sun.COM To get added to the list, send a request to: mp-request@Aus.Sun.COM Early patches are sent to the mailing list, plus active discussion on ideas for enhancements to mp. 2. Getting started. ------------------- Initially there is no Makefile file present in the mp source directory. You will need to copy Makefile.dist to Makefile, then adjust accordingly. The Makefile compilation details are setup to default to compiling on a Sun4 running SunOS v4.1. Note that there are various compilation definitions that might need uncommenting if you are trying to compile and run it on other machines or operating systems. These are: GECOSFIELDS - Number of "words" extracted from the user's gecos field. GECOSLENGTH - Maximum number of characters extracted from the gecos field. NOSTRCHR - uncomment if you don't have the strchr() function. PROLOGUE - Location of the mp prologue file (default: /usr/local/lib) SYSV - uncomment if you are running Unix System V. See the Makefile for a detailed description of each of these definitions. Once you are happy with these settings, then you should do a "make", which will compile the mp program. It is possible to change the number of lines printed per page, by adjusting the %%PageLength value in the initial portion of each of the PostScript prologue files. For example, with the default prologue file mp.pro.ps, A4 size paper users might find a page length of 70 more useful, and 86 seems a good value for LineLength in landscape mode. Before you install the mp files in the appropriate places, you should consider whether you want the installation to install the newsp, filep ... shell scripts. If this is not the case, then you will need to comment out this section of the Makefile. Look for the comment beginning "NOTE:". Alternatively you might only wish a subset to be installed, in which case you should adjust the MAILPNAMES definition in the Makefile accordingly. You now need to do an installation that is appropriate for your site. There are two types of installation: 1) If you are using US Letter size paper you should do a "make install". 2) If you are using A4 size paper, then you should do a "make install-a4". This installation will put the files in their default locations. You will probably have to be super-user when you do the "make install". 3. How mp works. ---------------- When mp processes a file, it first reads the designated prologue and extracts data from the following lines: %%PageLength nn - the number of lines per page %%LineLength nn - the number of chars on a line %%NumCols nn - the number of columns per page Then it reads the input files and reshapes them into PostScript using the following structuring conventions: %%Page: ? 1 (1) newpage <- physical page #1 ...data... (1) 1 endcol <- logical page #1, 1st col on this page ...data... (2) 2 endcol <- logical page #2, 2nd col on this page ...data... (3) 3 endcol <- logical page #3, 3rd col on this page (1) endpage <- physical page #1 %%Page: ? 2 (2) newpage <- physical page #2 ...data... (4) 1 endcol <- logical page #4, 1st col on this page ...data... (5) 2 endcol <- logical page #5, 2nd col on this page (3) endpage <- physical page #2 endfile <- end of first or only input file %%Page.... < .... <- 2nd input file, if any endfile < ... <- more, if any %%Trailer %%Pages: nn %%EOF Prologue files need to supply the above procedures, which may be empty. The following prologues are supplied with mp: mp.pro.ps standard prologue mp.pro.alt.ps alternative prologue, page nos. bottom right mp.pro.altl.ps alternative landscape mode prologue file. mp.pro.l.ps standard prologue, landscape, 2 columns mp.pro.ff.ps Filofax prologue mp.pro.fp.ps Franklin Planner prologue mp.pro.tm.ps Time Manager prologue mp.pro.ts.ps Time/System International prologue. 4. Trouble shooting hints. -------------------------- * From Mark Valentine Possible problems with mailp. On some hybrid systems (such as MIPS' RISC/os), testing for the existence of /usr/spool/lp isn't sufficient to determine the spooler to use. On our systems, for example, the directory exists, but we use only the Berkeley spooler (it's a site-specific decision which one you use). * From Dan Jacobson PRINT_CMD, which is used to specify the Unix command to use to print the mp output, is hardwired into mailp. * From John Macdonald setscreen tells the printer how to generate greyscales. Depending upon the screen angle and the dot density (45 and 106 above) you get differing patterns for the "grey" (a mixture of black and white portions that gives the impression of grey). There are various tradeoffs in these choices (hence the red-books recommendation). Small dot density gives grainier greys where the fact that it is built up from dots is quite evident. High dot densities allow for fewer levels of grey. The default for LaserWriters provides 33 grey levels with somewhat visible dots. The 106 45 setting provides only 9 grey levels, but much a smoother appearance. The default is more valuable if you are doing special effects like gradual changes in darkness and image reproduction. The alternate is more valuable if you use only a small number of distinct grey levels. If you have a postscript printer that is more than 300 dots per inch, it is quite possible that the manufacturer chosen default has a better appearance than the 106 45 explicit setting, since the number of spots per inch that are possible with such printer is much higher than with a 300 dpi printer. It is also possible that there is a similar sort of trade-off in their choice between levels and graininess, but it will be at a much finer level - magnifying glasses might be necessary to determine the best one. For further details, see Byte, July 1990, Don Lancaster "PostScript Insider Secrets" * From Bertrand Decouty As with patch #5 to v2.5, mailp (and friends) are now installed using symbolic links, as opposed to hard links. This is a potential problem to UNIX systems which don't have symbolic links. * From Bjorn P. Brox The /backspace definition in the PostScript prologue files won't work on all PostScript variants using Type1 fonts. The problem is that the backspacefont proc is using a feature in real PostScript: A CharStrings entry does not have to be a Type1 encrypted charstring, but can also be a function. If this is a problem, then replace: /backspace { -600 0 setcharwidth pop } bind def with /backspace <6f0878dde70d23b542> def 5. Acknowledgements. -------------------- The original version of mp was written by Steve Holden in the ICON language, when Steve worked for Sun Microsystems UK. I converted it to the C language and added a few features. Special thanks go to: Bruno Pillard of Chorus Systemes, France added support for MH mail and news article printing, plus a shell script (mailp) which tidies up the user interface to mp. Dave Glowacki of Public Works Computer Services, St Paul, MN. added the ability to print digests and tidied up some of the other options. Rick Rodgers, UCSF School of Pharmacy, San Francicso revised the initial version of the mp manual page. Doug Buchanan added support for printing in filofax and Time Manager format. Jerermy Webber of the Computer Science Department at the University of Adelaide rewrote the message parsing and option code and made substantial improvements to the programs user friendliness and robustness. Sam Manogharan added support for printing multiple files specified on the command line, and subject line filename print for ordinary files. Michael Tuchiarone added in the landscape mode. Johan Vromans revised and tidied up the PostScript structuring and the way the prologue files were handled. John Macdonald who supplied two PostScript prologue files which generate much prettier output. To Bertrand DeCouty, who supplied support in the PostScript prologue files for the ISO8859 character set. Glenn Reid from Adobe Systems wrote the backspacefont.ps code used in the prologue files. Also thanks to the following for various bug reports, fixes and suggestions for improvement: Jimmy Aitken, Frederick Avolio, Bruce G Barnett, Craig Bishop, James F. Blake, David Boone, Brachet, Bjorn P. Brox, Mike Bundschuh, Maureen Chew, Lupe Christoph, Steve Cliffe, Peter Collinson, Roger De Salis, L. Jill Debord, Bertrand Decouty, Paul Eggert, Ran Ever-Hadani, David Fiedler, Lars P. Fischer, Donn Fisher, Stephen Frede, Rick Gunderson, Andy Hall, Paul Higgins, Bill Houle, Ian Hoyle, Felix Ingrand, Scott A. Jordahl, Mike Khaw, Rainer Klute, Meinhard Kniffki, Brian Kohn, Hugues Leroy, Glenn M. Lewis, Dennis Linse, John Little, John Macdonald, Pierre Mareschal, Fulvio Marino, Sjoerd Mullender, Geoff Mulligan, Andy Norman, Francois Ougier, Bruno Pillard, Mark Prior, Roger Riggs, Jim Sanchez, David W. Sanderson, Bill Shannon, Amos Shapir, David W. Smith, Vic Tolomei, Sato Toshihiko, Larry Tsui, Walter Underwood, Mark Valentine, Larry W. Virden, Johan Vromans, Andreas Wettengel, Pauline van Winsen, Ian Young, ---------------------------------------------------------------------------- Suggestions for further improvement would be most welcome, plus bug reports and comments. Rich Burridge. PHONE: +61 2 413 2666 MAIL: richb@Aus.Sun.COM